



Industry Leading
Railway Dynamics
Software
Cost-effective analysis of railway dynamic performance and safety through simulation.
Vampire Virtual User Event - 16 July 2020
A big thank you to all those who presented at and attended our first Vampire Virtual User Event. It was a great success and good to see such a large cross-section of the Vampire community. In the sections below, you can find a full recording of the event as well as recordings of the individual presentations and Powerpoint slides.
Presentation List
Part 1 - Introduction and Welcome | Farzana Hampshire & Stephen Pell AtkinsRéalis |
Part 2 - Industry View | Mark Oakley RSSB |
Part 3 - Keynote Address | Mark Burstow Network Rail |
Part 4 - Vampire Development Plans | Alan Minnis, Ian Hills & Paul Molyneux-Berry AtkinsRéalis |
Part 5 - Interactive Vehicle Builder Demonstration | Alan Minnis AtkinsRéalis |
Part 6 - Modelling Switches and Crossings | Peter Klauser Vehicle Dynamics Group LLC |
Part 7 - Automation with Vampire | Phil Shackleton University of Huddersfield |
Part 8 - Vampire Longitudinal Dynamics | Owen Evans AtkinsRéalis |
Part 9 - Usersubs for Model Validation | Phil Rogers AtkinsRéalis |
Part 10 - Helpdesk and General Management | Yunshi Zhao AtkinsRéalis |
Part 11 - Closing Remarks and Q&A | Farzana Hampshire AtkinsRéalis |
Full Presentation
Vampire User Event - July 2020 - Full Video
Full video of the complete event (3h:15). To jump straight to individual presentations of particular interest please see the separate videos below.
Individual Presentations
Part 1 - Introduction
Farzana Hampshire, Vampire Product Lead, and Stephen Pell, Operations Manager - Rail Consulting, AtkinsRéalis
Farzana and Stephen introduce the event, provide a chance to meet the extensive Vehicle Dynamics team at AtkinsRéalis and provide some initial thoughts on Vampire's new home at AtkinsRéalis and our long term commitment to the development and support of Vampire and its users.
To download the slides for this presentation please click here.
Part 2 - Industry View
Mark Oakley, Professional Head of Rolling stock, Rail Safety and Standards Body (RSSB)
Introduction by Mark Oakley outlining the use of Rail Vehicle Dynamics Simulation Software, Vampire and how it fits into and supports the rail industry today.
To download the slides for this presentation please click here.
Part 3 - Keynote Address
Mark Burstow, Principal Vehicle Track Dynamics Engineer, Network Rail
Keynote Address by Mark Burstow. Mark explores the use of modelling and simulation using Vampire from an infrastructure point of view at Network Rail and the continued development of its use throughout the years.
To download the slides for this presentation please click here.
Part 4 - Vampire Development Plans
Alan Minnis, Principal Consultant, Ian Hills, Vampire Technical Lead, Paul Molyneux-Berry, Principal Engineer, AtkinsRéalis
Alan, Ian and Paul present the latest version of Vampire from AtkinsRéalis (version 7.00), discuss the upcoming developments that are planned for Vampire versions 7.10 and beyond, and how the Vampire community can engage with AtkinsRéalis to request new features and report bugs.
To download the slides for this presentation please click here.
Part 5 - Interactive Vehicle Builder Demonstration
Alan Minnis, Principal Consultant, AtkinsRéalis
A demonstration of the Interactive Vehicle Builder (IVB) by Alan Minnis, showing just how quick it can be to build a complete vehicle model in Vampire. Here you can see Alan build a vehicle model in less than 15 mins. The speed and ease of build and simulation continue to be one of Vampire's greatest strengths.
Part 6 - Modelling Switches and Crossings
Peter Klauser, Vehicle Dynamics Group LLC
Peter discusses his recent work on Modelling Switches & Crossings. The presentation provides an insight into how modelling this complicated track-form and contact can be best achieved in Vampire and what to watch out for.
To download the abreviated slides used during this presentation please click here.
To download the full unabreviated version of Peter Kauser's presentation on Modelling Switches and Crossings please click here.
Part 7 - Automation with Vampire
Phil Shackleton, Institute of Railway Research (IRR), University of Huddersfield
Phil provides an inspirational presentation on how it is possible to automate tasks in Vampire both by using Vampire's in-house automation tools and through external automation tools utilising Vampire's easy to use text input formats and its ability to be run from the command line.
To download the slides for this presentation please click here.
Part 8 - Vampire Longitudinal Dynamics
Owen Evans, Principal Engineer, AtkinsRéalis
Introduction to the new and upcoming Longitudinal Dynamics features of Vampire by Owen Evans. Owen describes the new features and demonstrates an interesting case study used as part of the validation of the new features.
To download the slides for this presentation please click here.
Part 9 - Usersubs for Model Validation
Phil Rogers, Technical Director, Dynamics Gauging and Testing, AtkinsRéalis
Phil presents various methods to extend Vampire using User Subroutines (usersubs) to enable more accurate simulation of actual static test results for the purposes of Model Validation.
To download the slides for this presentation please click here.
Part 10 - Helpdesk and General Management
Yunshi Zhao, Vampire Product Manager, AtkinsRéalis
Yunshi Zhao introduces the new Vampire helpdesk system, Vampire website and various contact and support methods.
To download the slides for this presentation please click here.
Part 11 - Closing Remarks and Q&A
Farzana Hampshire, Vampire Product Lead, AtkinsRéalis
Closing remarks by Farzana Hampshire, followed by the Question and Answer sessions recorded throughout the event.
Contact Us
For more information on Vampire licensing, training, support, software capabilities and consultancy please contact us using one of the options below.
Email : vampire@atkinsrealis.com
Tel : +44 1332 225882